Underslung Electric Single or Double-girder Suspension Crane

   
This crane is applicable in factories and warehouses where the height from the rail surface to the lower edge of the truss is equal to or shorter than 500mmThe trolley is equipped with a specific electric hoist that features flexible structure and reliable and safe operationIf clients have special requirements on the spanour company is able to carry out design and production of non-standard equipment 

Suspension crane is electric traveling suspension crane, working on the roof of the work site. It is applicable to non-corbels plant, warehouses and other places. Suspension crane supporting the use of CD, MD electric hoist, widely used in machining, assembly, repair, handling lifting and other operation places.

Electric suspension crane working level is A4, including two operation modes: ground control and remote control. Crane traveling speed can also be designed to dual speed or frequency control and other types.
Suspension crane with such advantages: compact structure, rigid, simple operation, low noise, safe and reliable, attractive appearance and so on. Our company has nearly 30 years of production and design history of electric suspension crane, has accumulated a wealth of experience in its design and production, and can also design and produce non-standard electric suspension crane adapt to various conditions.
Weihua Crane is professional material handling equipment manufacturer and servicer with largest production in global. Provide you with overhead crane, gantry crane, electric hoist, etc. of safe, reliable and efficient crane solutions and services. 

Features
Suspension crane mainly consists of bridge frame, traveling mechanism, electric hoist, electric control system, etc.
Electric suspension crane bridge is mainly composed of main beam and end beam device. Main beam is the main bearing component of hoist type crane; its lower edge is the traveling track of electric hoist. According to different span, general design of 500mm, 750mm, 1000mm cantilever of electric suspension crane to meet the electric hoist runs to the end of the main beam. Both ends of the crane main girder design with trolley traveling blocking and buffer. Main beam camber is (1/1000 ~ 1.4 / 1000) S, the maximum camber shall be located in the S / 10 range of the span middle.

Suspension Crane end beam device is located just above the span position of the main beam, connected with the main beam by single hole articulated plate, and its structure is mainly consist by channel steel, reinforcing plate and connecting plate welding forming, it is delicate strong. At both ends of end beams installed with rubber buffers, can avoid structural parts due to collision damage. Between main and end beams using the balance shaft connection structure, simple structure, easy to install, easy to transport and storage. The end beams with such characteristics: compact structure, good rigidity, appearance and good welding performance.
Crane traveling mechanism adopt the respectively drive, drive and braking done by conical rotor motor, transmission adopt "one open and two closed" type gear.
Lifting Mechanism is Electric Hoist, please click CD Electric Hoist, MD Electric Hoist to get detailed information.

Welcome to buy the discount famous brands' underslung electric single or double-girder suspension crane with us and get the free sample from us. We are known as one of the leading manufacturers and suppliers in China for our unmatched service and high quality products.